Grates & Frames

Light Service Galvanised Grates and Frames (Type 1)

• Hot dipped galvanised after fabrication.
• Suitable for use in concreted or bituminised areas servicing pedestrian traffic.
• Special sizes to suit other pits supplied to order.

Heavy Service Galvanised Grates and Frames (Type 1)

• Hot dipped galvanised after fabrication.
• Suitable for vehicular traffic.
• Special sizes to suit other pits supplied to order.

Galvanised Grates and Frames (Type 2)

• Suitable for trench or surnp applications.
• Hot dipped galvanised after fabrication.
• 2 standard load bar sizes available.
• Other sizes available to order.

Paved Area Cast Iron Grates and Frames

• Grade 12 cast iron.
• Suitable for use in paved areas servicing pedestrian or vehicular traffic.
• Loadings; Heavy service up to 4 tonnes wheel load and Light service up to 2 tonnes wheel load.
• Grate and frame are tar dipped.

Chequerplates and Sump Finishing Collars

• 5mm thick galvanised chequerplate.
• For finishing pits in grassed, bituminised or paved areas.
• Special sizes fabricated to order.
• Minimum concrete strength, 32 MPa at 25 days.